Help: Port for router firewall!!

[RockAndStone]

Dont know if this is the right place to post thread.
But can anyone please tell me what the port adress is for EU. i cant play b4 i get it

[Eman Jakubisko]

Originally Posted by RockAndStone

Dont know if this is the right place to post thread.
But can anyone please tell me what the port adress is for EU. i cant play b4 i get it

dunno, if u want fast results, google it. Or try asking support.

[dandy]

Originally Posted by RockAndStone

Dont know if this is the right place to post thread.
But can anyone please tell me what the port adress is for EU. i cant play b4 i get it

http://www.planetcalypsoforum.com/fo...-entropia.html

Firewall settings for Entropia
Hi;

I always have my adsl box firewall to block all incoming/out going as the default.

Entropia uses connecting settings from Internet Explorer Connections.
And the game won't run if you use a proxy setting in your Internet Explorer.

Ok ok I don't use Iexplore browser for browsing so no problem there and if you want to use a proxy in your Iexplore then you have to exclude all ip below.(out of topic a bit)

A bit of history:

Server Park Upgrade: IP Address Confirmation

MindArk had published their ips link above of their Server IP.
It was an old thread and I bumped it once and now forgotten.
So I refresh and publish it here for any one who may use it.

Firewall should be a combination of IP address and Port.
If you open ports without restricting IP address; it is like open a door for any one to get in or out as will.

With the combination of IP and Ports; your only let guys you know in or out. Event tho you may infected with an virus you may be protected by your firewall.

If you want to play Entropia at work(not sure you are allowed), make sure these IP and Port number given to your IT Administrator(gl)

If you have a firewall setup; these information is at hand without try and error.

Here is the IPs and Ports I open for my firewall to let Entropia swim thru.

IP:

195.128.241.2 - 195.128.241.8 .... port 80, xx
94.31.61.0 - 94.31.61.63 ............ port 80,30583,30584,20,21
62.93.236.0 - 62.93.236.63 ......... port 80, xx
212.28.216.80 - 212.28.216.95 .... port 80
82.98.226.192 - 82.98.226.255 .... port 80, xx
217.78.36.97 - 217.78.36.101 ..... port 80 (vu/patches)
216.137.37.0 - 216.137.37.255 .... port 80 (Repair Installation from the ClientLoader)
192.121.4.4 ... port 443/35060 (voice chat Ericsson)

Ports:

TCP/UDP:544
TCP:80
TCP:20,21
TCP/UDP:30583 - 30584
TCP/UDP:35060 (voice chat Ericsson)

note about xx: It may use other ports, but currently doesn't show of using any other ports and these ip addresses seem not active or being used at the moment, but they were used in the past.

Hope this information maybe useful.


Cheer


Dandy

[RockAndStone]

Originally Posted by dandy

http://www.planetcalypsoforum.com/fo...-entropia.html

Firewall settings for Entropia
Hi;

I always have my adsl box firewall to block all incoming/out going as the default.

Entropia uses connecting settings from Internet Explorer Connections.
And the game won't run if you use a proxy setting in your Internet Explorer.

Ok ok I don't use Iexplore browser for browsing so no problem there and if you want to use a proxy in your Iexplore then you have to exclude all ip below.(out of topic a bit)

A bit of history:

Server Park Upgrade: IP Address Confirmation

MindArk had published their ips link above of their Server IP.
It was an old thread and I bumped it once and now forgotten.
So I refresh and publish it here for any one who may use it.

Firewall should be a combination of IP address and Port.
If you open ports without restricting IP address; it is like open a door for any one to get in or out as will.

With the combination of IP and Ports; your only let guys you know in or out. Event tho you may infected with an virus you may be protected by your firewall.

If you want to play Entropia at work(not sure you are allowed), make sure these IP and Port number given to your IT Administrator(gl)

If you have a firewall setup; these information is at hand without try and error.

Here is the IPs and Ports I open for my firewall to let Entropia swim thru.

IP:

195.128.241.2 - 195.128.241.8 .... port 80, xx
94.31.61.0 - 94.31.61.63 ............ port 80,30583,30584,20,21
62.93.236.0 - 62.93.236.63 ......... port 80, xx
212.28.216.80 - 212.28.216.95 .... port 80
82.98.226.192 - 82.98.226.255 .... port 80, xx
217.78.36.97 - 217.78.36.101 ..... port 80 (vu/patches)
216.137.37.0 - 216.137.37.255 .... port 80 (Repair Installation from the ClientLoader)
192.121.4.4 ... port 443/35060 (voice chat Ericsson)

Ports:

TCP/UDP:544
TCP:80
TCP:20,21
TCP/UDP:30583 - 30584
TCP/UDP:35060 (voice chat Ericsson)

note about xx: It may use other ports, but currently doesn't show of using any other ports and these ip addresses seem not active or being used at the moment, but they were used in the past.

Hope this information maybe useful.


Cheer


Dandy

Hey

Thank you so mutch for this information. Truth is i never open ports before and got to admit i realy have realy sucky computer skills. Dont realy know how to add the ports to my router firewall, i have a thomson st780. i know have to get into the router but not how to type in the ports corectly. Sorry for this but if you could help me i would be realy greatfull.

[RockAndStone]

Iwe tried to add it like this, but i still cant log in :/

Game or Application Definition
A game or application is made of one or more TCP/UDP port ranges. Each incoming port range can be translated into a different internal (local network) port range. Port ranges can be statically assigned to devices or dynamically assigned using an outgoing trigger.



Protocol Port Range Translate To ... Trigger Protocol Trigger Port



TCP 544 - 544 544 - 544 - -


UDP 544 - 544 544 - 544 - -


TCP 80 - 80 80 - 80 - -


TCP 20 - 21 20 - 21 - -


TCP 30583 - 30584 30583 - 30584 - -


UDP 30583 - 30584 30583 - 30584 - -


This is one game aplication

[dandy]

Originally Posted by RockAndStone

Iwe tried to add it like this, but i still cant log in :/

Game or Application Definition
A game or application is made of one or more TCP/UDP port ranges. Each incoming port range can be translated into a different internal (local network) port range. Port ranges can be statically assigned to devices or dynamically assigned using an outgoing trigger.



Protocol Port Range Translate To ... Trigger Protocol Trigger Port



TCP 544 - 544 544 - 544 - -


UDP 544 - 544 544 - 544 - -


TCP 80 - 80 80 - 80 - -


TCP 20 - 21 20 - 21 - -


TCP 30583 - 30584 30583 - 30584 - -


UDP 30583 - 30584 30583 - 30584 - -


This is one game aplication

Event I confused reading the manual: http://www.speedtouch.nl/docs/ST780sip_UserGuide.pdf



If I am not mistaken, all you have to do is adding all the ports in Trigger Port field.

You can learn firewall by looking into other games' rules that already in your firewall.

Post a couple of games settings like Delta Force/Call of Duty may help others to figure out.

I can't help you much because I don't have this box.


cheer


dandy

[Jenny ferr]

Ignore, useless page now

[RockAndStone]

Originally Posted by dandy

Event I confused reading the manual: http://www.speedtouch.nl/docs/ST780sip_UserGuide.pdf



If I am not mistaken, all you have to do is adding all the ports in Trigger Port field.

You can learn firewall by looking into other games' rules that already in your firewall.

Post a couple of games settings like Delta Force/Call of Duty may help others to figure out.

I can't help you much because I don't have this box.


cheer


dandy

Ty for trying, iwe done all that realy, iwe done it the same way any other ports are made, and aplied them and everything. but still wont work.
thomson relay sux lol!!
seems like iwe did it the right way, but still wont work.

Portforward costs money to buy, and entropia aint on there either :/

But as i said, ty so mutch for trying helping me out, im realy gretfull guys

[Vin_Gunman_xXx]

Hmm, maybe you should post what actually your problem is. You've asked for the ports and said, it didnt work. But what exactly didnt work ? On which place you cant connect ? Are you sure its blamed on your router ?

[Jenny ferr]

hmm so they changed their webpage

used to be guides on how to do it on all those routers